Panasonic Switch AVFS FS T User Manual

VDE  
NEW SUBMINIATURE  
SWITCHES  
WITH HIGH PRECISION  
AV (FS•FS-T)  
SWITCHES  
FEATURES  
• Consistent quality and high  
precision through sophisticated  
automatic fabrication system —O.P.:  
8.4 0.3 mm (O.P.of conventional  
subminiature switches: 8.4 0.5)  
• Flux-resistant construction with  
integrally molded terminals  
• 2 lever pivot positions available for  
applications where low operating  
force is required  
TYPICAL  
APPLICATIONS  
• Solder terminal; Self-standing,  
internationally common pitch, right  
angle, left angle terminals for PC  
board; Quick connect .110 terminals  
for easy mounting  
FS  
FS-T  
• Communication equipment  
• Vending machines  
• Security systems  
• Data systems  
• Medical equipment  
• VCR  
• Insulation guard available for safety  
mounting  
PC board thickness:  
1.6 mm  
Compliance with RoHS Directive  
CONSTRUCTION (Example: AV3/AVM3 type)  
CONTACT  
ARRANGEMENT  
Standard version  
Long life version  
2 lever pivot positions  
Spring  
Arch-shaped independent spring  
Solder-terminal  
Self-standing PC terminal  
.110 Quick connect terminal  
COM  
NO  
NC  
Flux resistant construction  
Optional insulation guard  
Remark: As for FS-T switches, the terminals are the different shape.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
APPLICABLE CURRENT RANGE  
O.F.  
Rating  
Type  
Contact  
1mA  
100mA  
3A  
5A  
0.25 N  
0.49 N  
0.98 N  
1.47 N  
Silver alloy contact  
Standard  
version  
Gold-clad triple layer  
contact type  
Silver alloy contact  
Long life  
version  
Gold-clad triple layer  
contact type  
Remark: For high capacity contact rating up to 10.1 A, please refer to PS (AVM3ⅪⅪⅪP) switches catalog.  
PRODUCT TYPES  
1. FS switches (In-line terminal type)  
Standard type  
Part No.  
Self-standing solder terminal  
Operating force,  
Max.  
Internationally  
common pitch  
PC terminal  
Actuator  
Self-standing  
PC terminal  
With opposite  
side guard  
Without guard  
With guard  
0.49N  
0.98N  
0.20N  
0.39N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
0.25N  
0.49N  
0.98N  
0.098N  
0.20N  
0.39N  
0.078N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
AV32023  
AV31023  
AV33023  
AV34023  
AV35023  
Pin plunger  
AV32043  
AV31043  
AV33043  
AV34043  
AV35043  
AV32123  
AV31123  
AV33123  
AV34123  
AV35123  
Short hinge lever  
Hinge lever  
AV32143  
AV31143  
AV33143  
AV34143  
AV35143  
AV32223  
AV31223  
AV33223  
AV34223  
AV35223  
AV32243  
AV31243  
AV33243  
AV34243  
AV35243  
AgNi alloy contact  
type  
AV32323  
AV31323  
AV33323  
AV34323  
AV35323  
Long hinge lever  
Simulated roller lever  
Roller lever  
AV32343  
AV31343  
AV33343  
AV34343  
AV35343  
AV32423  
AV31423  
AV33423  
AV34423  
AV35423  
AV32443  
AV31443  
AV33443  
AV34443  
AV35443  
AV32523  
AV31523  
AV33523  
AV34523  
AV35523  
AV32543  
AV31543  
AV33543  
AV34543  
AV35543  
AV3200613  
AV3202613  
AV3204613  
AV3210613  
AV3212613  
AV3214613  
AV3220613  
AV3222613  
AV3224613  
AV3232613  
AV3234613  
AV3242613  
AV3244613  
AV3252613  
AV3254613  
AV3100613  
AV3102613  
AV3104613  
AV3110613  
AV3112613  
AV3114613  
AV3120613  
AV3122613  
AV3124613  
AV3132613  
AV3134613  
AV3142613  
AV3144613  
AV3152613  
AV3154613  
AV3300613  
AV3302613  
AV3304613  
AV3310613  
AV3312613  
AV3314613  
AV3320613  
AV3322613  
AV3324613  
AV3332613  
AV3334613  
AV3342613  
AV3344613  
AV3352613  
AV3354613  
AV3400613  
AV3402613  
AV3404613  
AV3410613  
AV3412613  
AV3414613  
AV3420613  
AV3422613  
AV3424613  
AV3432613  
AV3434613  
AV3442613  
AV3444613  
AV3452613  
AV3454613  
AV3500613  
AV3502613  
AV3504613  
AV3510613  
AV3512613  
AV3514613  
AV3520613  
AV3522613  
AV3524613  
AV3532613  
AV3534613  
AV3542613  
AV3544613  
AV3552613  
AV3554613  
Pin plunger  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
Part No.  
Operating force,  
Max.  
Actuator  
Pin plunger  
Right angle terminal  
AV36023  
Left angle terminal  
.110 Quick-connect  
AV38023  
0.49N  
0.98N  
0.20N  
0.39N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
0.25N  
0.49N  
0.98N  
0.098N  
0.20N  
0.39N  
0.078N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
AV37023  
AV36043  
AV37043  
AV38043  
AV36123  
AV37123  
AV38123  
Short hinge lever  
Hinge lever  
AV36143  
AV37143  
AV38143  
AV36223  
AV37223  
AV38223  
AV36243  
AV37243  
AV38243  
AgNi alloy contact  
type  
AV36323  
AV37323  
AV38323  
Long hinge lever  
Simulated roller lever  
Roller lever  
AV36343  
AV37343  
AV38343  
AV36423  
AV37423  
AV38423  
AV36443  
AV37443  
AV38443  
AV36523  
AV37523  
AV38523  
AV36543  
AV37543  
AV38543  
AV3600613  
AV3602613  
AV3604613  
AV3610613  
AV3612613  
AV3614613  
AV3620613  
AV3622613  
AV3624613  
AV3632613  
AV3634613  
AV3642613  
AV3644613  
AV3652613  
AV3654613  
AV3700613  
AV3702613  
AV3704613  
AV3710613  
AV3712613  
AV3714613  
AV3720613  
AV3722613  
AV3724613  
AV3732613  
AV3734613  
AV3742613  
AV3744613  
AV3752613  
AV3754613  
AV3800613  
AV3802613  
AV3804613  
AV3810613  
AV3812613  
AV3814613  
AV3820613  
AV3822613  
AV3824613  
AV3832613  
AV3834613  
AV3842613  
AV3844613  
AV3852613  
AV3854613  
Pin plunger  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
Remark: When ordering, please refer to “Remarks” of ordering information.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
2. FS-T switches (Cross-line terminal type)  
Standard type  
Part No.  
Operating force,  
Actuator  
Solder terminal without  
guard  
.110 Quick-connect  
terminal  
Max.  
PC terminal  
0.49N  
0.98N  
0.20N  
0.39N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
0.25N  
0.49N  
0.98N  
0.098N  
0.20N  
0.39N  
0.078N  
0.16N  
0.34N  
0.12N  
0.25N  
0.16N  
0.34N  
0.20N  
0.39N  
AVT32023  
AVT34023  
AVT38023  
Pin plunger  
AVT32043  
AVT34043  
AVT38043  
AVT32123  
AVT34123  
AVT38123  
Short hinge lever  
Hinge lever  
AVT32143  
AVT34143  
AVT38143  
AVT32223  
AVT34223  
AVT38223  
AVT32243  
AVT34243  
AVT38243  
AgNi alloy contact  
type  
AVT32323  
AVT34323  
AVT38323  
Long hinge lever  
Simulated roller lever  
Roller lever  
AVT32343  
AVT34343  
AVT38343  
AVT32423  
AVT34423  
AVT38423  
AVT32443  
AVT34443  
AVT38443  
AVT32523  
AVT34523  
AVT38523  
AVT32543  
AVT34543  
AVT38543  
AVT3200613  
AVT3202613  
AVT3204613  
AVT3210613  
AVT3212613  
AVT3214613  
AVT3220613  
AVT3222613  
AVT3224613  
AVT3232613  
AVT3234613  
AVT3242613  
AVT3244613  
AVT3252613  
AVT3254613  
AVT3400613  
AVT3402613  
AVT3404613  
AVT3410613  
AVT3412613  
AVT3414613  
AVT3420613  
AVT3422613  
AVT3424613  
AVT3432613  
AVT3434613  
AVT3442613  
AVT3444613  
AVT3452613  
AVT3454613  
AVT3800613  
AVT3802613  
AVT3804613  
AVT3810613  
AVT3812613  
AVT3814613  
AVT3820613  
AVT3822613  
AVT3824613  
AVT3832613  
AVT3834613  
AVT3842613  
AVT3844613  
AVT3852613  
AVT3854613  
Pin plunger  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
3. FS switches (In-line terminal type)  
Long life version  
Part No.  
Operating force,  
Max.  
Self-standing solder terminal  
Internationally  
common pitch  
PC terminal  
Actuator  
Self-standing  
PC terminal  
With opposite  
side guard  
Without guard  
With guard  
Pin plunger  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
AVM32053  
AVM32153  
AVM32253  
AVM32353  
AVM32453  
AVM32553  
AVM31053  
AVM31153  
AVM31253  
AVM31353  
AVM31453  
AVM31553  
AVM33053  
AVM33153  
AVM33253  
AVM33353  
AVM33453  
AVM33553  
AVM34053  
AVM34153  
AVM34253  
AVM34353  
AVM34453  
AVM34553  
AVM35053  
AVM35153  
AVM35253  
AVM35353  
AVM35453  
AVM35553  
Short hinge lever  
Hinge lever  
AgNi alloy contact  
type  
Long hinge lever  
Simulated roller lever  
Roller lever  
Pin plunger  
AVM3205613 AVM3105613 AVM3305613 AVM3405613 AVM3505613  
AVM3215613 AVM3115613 AVM3315613 AVM3415613 AVM3515613  
AVM3225613 AVM3125613 AVM3325613 AVM3425613 AVM3525613  
AVM3235613 AVM3135613 AVM3335613 AVM3435613 AVM3535613  
AVM3245613 AVM3145613 AVM3345613 AVM3445613 AVM3545613  
AVM3255613 AVM3155613 AVM3355613 AVM3455613 AVM3555613  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
Part No.  
Operating force,  
Max.  
Actuator  
Right angle terminal  
Without guard  
AVM36053  
Left angle terminal  
With guard  
.110 Quick-connect  
With opposite side guard  
AVM38053  
Pin plunger  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
AVM37053  
Short hinge lever  
Hinge lever  
AVM36153  
AVM37153  
AVM38153  
AVM36253  
AVM37253  
AVM38253  
AgNi alloy contact  
type  
Long hinge lever  
Simulated roller lever  
Roller lever  
AVM36353  
AVM37353  
AVM38353  
AVM36453  
AVM37453  
AVM38453  
AVM36553  
AVM37553  
AVM38553  
Pin plunger  
AVM3605613  
AVM3615613  
AVM3625613  
AVM3635613  
AVM3645613  
AVM3655613  
AVM3705613  
AVM3715613  
AVM3725613  
AVM3735613  
AVM3745613  
AVM3755613  
AVM3805613  
AVM3815613  
AVM3825613  
AVM3835613  
AVM3845613  
AVM3855613  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
Remark: When ordering, please refer to “Remarks” of ordering information.  
4. FS-T switches (Cross-line terminal type)  
Long life version  
Part No.  
Operating force,  
Actuator  
Max.  
Solder terminal Without  
guard  
.110 Quick-connect  
terminal  
PC terminal  
Pin plunger  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
1.47N  
0.59N  
0.54N  
0.44N  
0.54N  
0.59N  
AVL32053  
AVL34053  
AVL38053  
Short hinge lever  
Hinge lever  
AVL32153  
AVL34153  
AVL38153  
AVL32253  
AVL34253  
AVL38253  
AgNi alloy contact  
type  
Long hinge lever  
Simulated roller lever  
Roller lever  
AVL32353  
AVL34353  
AVL38353  
AVL32453  
AVL34453  
AVL38453  
AVL32553  
AVL34553  
AVL38553  
Pin plunger  
AVL3205613  
AVL3215613  
AVL3225613  
AVL3235613  
AVL3245613  
AVL3255613  
AVL3405613  
AVL3415613  
AVL3425613  
AVL3435613  
AVL3445613  
AVL3455613  
AVL3805613  
AVL3815613  
AVL3825613  
AVL3835613  
AVL3845613  
AVL3855613  
Short hinge lever  
Hinge lever  
Gold-clad triple layer  
contact type  
Long hinge lever  
Simulated roller lever  
Roller lever  
Remark: When ordering, please refer to “Remarks” of ordering information.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
SPECIFICATIONS  
1.Contact rating  
Standard version  
Long life version  
AgNi alloy contact type  
Gold-clad contact  
type  
Gold-clad contact  
type  
AgNi alloy contact type  
Voltage  
Triple layer  
Triple layer  
Resistive load  
(cosφ]1)  
Inductive load  
(cosφ]0.6-0.7)  
Resistive load  
(cosφ]1)  
Resistive load  
(cosφ]1)  
Inductive load  
(cosφ]0.6-0.7)  
Resistive load  
(cosφ]1)  
125V AC  
250V AC  
30V DC  
3A  
3A  
2A  
2A  
0.1A  
0.1A  
0.1A  
5A  
5A  
3A  
3A  
0.1A  
0.1A  
0.1A  
3A  
2A  
5A  
3A  
125V DC  
0.4A  
0.05A  
0.4A  
0.05A  
Remark: Time constant shall be less than 7 msec. for DC inductive loads.  
2.Characteristics  
Standard version  
Long life version  
AgNi alloy contact type  
5 × 104 at 20 cpm  
Gold-clad contact type  
2 × 105 at 20 cpm  
AgNi alloy contact type  
5 × 104 at 20 cpm  
Gold-clad contact type  
2 × 105 at 20 cpm  
Electrical life at rated load (O.T.max.)  
Mechanical life  
3 × 107 (O.T.: Specified value)  
5 × 105 at 60 cpm (O.T.max.)  
107 (O.T.max.) at 60 cpm  
Insulation resistance  
Min.100Mat 500V DC  
Dielectric strength  
Between non-continuous terminals  
Between each terminal and other  
exposed metal parts  
1,000 Vrms  
1,500 Vrms  
1,500 Vrms  
Between each terminal and ground  
Vibration resistance (Pin plunger type)  
10 to 55 Hz at single amplitude of 1.5mm (Contact opening: max.1 msec.)  
294 m/s2 min.  
294 m/s2 min.  
(O.F. 0.98 N)  
147 m/s2 min.  
(O.F. 0.49 N)  
49 m/s2 min.  
(O.F. 0.25 N)  
Shock resistance (Pin plunger type)  
(Contact opening: less than 1 msec.)  
(O.F. 0.98 N)  
147 m/s2 min.  
(O.F. 0.49 N)  
294 m/s2 min.  
50 mmax.  
(by voltage drop 1 A  
6 to 8V DC)  
100 mmax.  
(by voltage drop 0.1 A  
6 to 8V DC)  
Au: 50 mmax. (by voltage drop 0.1 A 6 to 8V DC)  
Ag: 50 mmax. (by voltage drop 1 A 6 to 8V DC)  
Contact resistance (Initial)  
Allowable operating speed  
Max.operating cycle rate  
Ambient temeprature  
Unit weight  
0.1 to 1,000 mm/sec.  
300 cpm  
–25°C to +85°C (no freezing below 0°C)  
Approx.2g  
3.Operating characteristics  
1) Pin plunger  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
0.6mm  
M.D.max.  
O.T.max.  
0.4mm  
O.P.  
0
2
4
5
0.25N  
0.49N  
0.98N  
1.47N  
0.020N  
0.074N  
0.15N  
Distance from mounting holes: 8.4 0.3mm  
Distance from stand-off:  
FS 11.8 0.4mm  
0.1mm  
FS-T 11.7 0.4mm  
0.20N  
2) Short hinge lever  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
2.5mm  
M.D.max.  
0.5mm  
O.T.max.  
0.8mm  
O.P.  
0
2
4
5
0.098N  
0.20N  
0.39N  
0.59N  
0.004N  
0.017N  
0.034N  
0.039N  
Distance from mounting holes: 8.8 0.8mm  
Distance from stand-off:  
FS 12.2 0.9mm  
FS-T 12.1 0.9mm  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
3) Hinge lever  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
2.8mm  
M.D.max.  
0.8mm  
O.T.max.  
1.2mm  
O.P.  
0
2
4
5
0.078N  
0.16N  
0.34N  
0.54N  
0.003N  
0.015N  
0.029N  
0.034N  
Distance from mounting holes: 8.8 0.8mm  
Distance from stand-off:  
FS 12.2 0.9mm  
FS-T 12.1 0.9mm  
4) Long hinge lever  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
3.5mm  
M.D.max.  
1.0mm  
O.T.max.  
1.6mm  
O.P.  
0
2
4
5
Distance from mounting holes: 8.8 1.2mm  
Distance from stand-off:  
FS 12.2 1.3mm  
0.12N  
0.25N  
0.44N  
0.012N  
0.025N  
0.029N  
FS-T 12.1 1.3mm  
5) Simulated roller lever  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
2.8mm  
M.D.max.  
0.8mm  
O.T.max.  
1.2mm  
O.P.  
0
Distance from mounting holes: 11.65 0.8mm  
Distance from stand-off:  
2
0.16N  
0.34N  
0.54N  
0.015N  
0.029N  
0.034N  
FS 15.05 0.9mm  
FS-T 14.95 0.9mm  
4
5
6) Roller lever  
4th digit  
number of  
Part No.  
O.F.max.  
R.F.min.  
P.T.max.  
2.5mm  
M.D.max.  
0.5mm  
O.T.max.  
0.8mm  
O.P.  
0
2
4
5
Distance from mounting holes: 14.5 0.8mm  
Distance from stand-off:  
FS 17.9 0.9mm  
0.20N  
0.39N  
0.59N  
0.017N  
0.034N  
0.039N  
FS-T 17.8 0.9mm  
mm General tolerance: 0.25  
DIMENSIONS  
1. FS switches (In-line terminal type)  
1-(1) Solder terminal (without guard)  
4.0  
0.2  
1.85  
0.12  
0.15  
1.1  
3.4  
NO  
C
NC  
0.12  
1.5  
0.5  
7.4  
0.2  
0.15  
2.8  
8.7  
0.1  
1.25  
0.15  
15.4  
19.8  
5.2  
0.3  
0.2  
6.4  
Dimensions other than drawn above is same as self-standing PC board terminal.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
1-(2) Solder terminal (with guard)  
mm General tolerance: 0.25  
NO  
C
NC  
8.0  
24.0  
Dimensions other than drawn above is same as guardless type.  
1-(3) Solder terminal (with opposite side guard)  
8.0  
24.0  
Dimensions other than drawn above is same as guardless type.  
1-(4) Self-standing PC terminal  
Pin plunger  
PC board pattern  
0.05  
0.3  
3-1.2  
dia.  
7.6  
4.0  
(
)
P.T.  
0.6 max.  
1.8  
0.1  
8.7  
0.1  
15.4  
(
)
O.P.  
0.3  
7.7  
0.2  
(
)
6.7 8.4  
O.P.  
+0.1  
-0.05  
1.85  
0.4  
2.4  
11.8  
NO  
0.12  
C
NC  
1.1  
0.15  
3.4  
2.4  
7.4  
Pretravel, Max. mm  
0.6  
0.1  
0.4  
+0.1  
2.4  
dia.  
-0.05  
0.1  
0.1  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.12  
2.5  
9.5  
0.9  
2.2  
0.5  
1.5  
1.25 0.1  
Distance from mounting  
hole, mm  
0.15  
8.7  
8.4 0.3  
5.2  
Operating  
position  
0.1  
0.15  
0.3  
0.2  
2.2  
15.4  
19.8  
6.4  
Distance from standoff,  
mm  
11.8 0.4  
Short hinge lever  
(
)
P.T.  
4.0  
0.4  
12.85  
5.0  
2.5 max.  
Pretravel, Max. mm  
2.5  
0.5  
0.8  
(
)
O.P.  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.8  
8.8  
(
)
O.P.  
6.6  
0.9  
12.2  
NO  
C
NC  
Distance from mounting  
8.8 0.8  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
12.2 0.9  
Hinge lever  
(
)
P.T.  
0.4  
4.0  
7.15  
2.8 max.  
Pretravel, Max. mm  
2.8  
0.8  
1.2  
(
)
O.P.  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.8  
8.8  
(
)
O.P.  
0.9  
12.2  
NO  
NC  
Distance from mounting  
C
8.8 0.8  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
12.2 0.9  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
mm General tolerance: 0.25  
Long hinge lever  
(
)
P.T.  
4.0  
3.5 max.  
0.4  
13.1  
Pretravel, Max. mm  
3.5  
1.0  
1.6  
Movement differential, Max. mm  
Overtravel, Min. mm  
(
)
O.P.  
1.2  
8.8  
(
)
O.P.  
1.3  
12.2  
NO  
Distance from mounting  
C
NC  
8.8 1.2  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
12.2 1.3  
Simulated roller lever  
(
)
P.T.  
0.4  
4.0  
6.3  
2.8 max.  
R2.5  
Pretravel, Max. mm  
2.8  
0.8  
1.2  
Movement differential, Max. mm  
Overtravel, Min. mm  
(
)
O.P.  
0.8  
11.65  
(
)
O.P.  
0.9  
15.05  
Distance from mounting  
hole, mm  
11.65 0.8  
15.05 0.9  
NO  
C
NC  
Operating  
position  
Distance from standoff,  
mm  
Roller lever  
3.2  
(
)
P.T.  
0.4  
2.5 max.  
5.15  
5.0 dia.  
Pretravel, Max. mm  
2.5  
0.5  
0.8  
(
)
O.P.  
0.8  
Movement differential, Max. mm  
Overtravel, Min. mm  
14.5  
(
)
O.P.  
0.9  
17.9  
Distance from mounting  
hole, mm  
NO  
14.5 0.8  
17.9 0.9  
C
NC  
Operating  
position  
Distance from standoff,  
mm  
1-(5) Internationally common pitch PC terminal  
PC board pattern  
(P.T.)  
0.6max.  
4.0  
3-1.5 0.05 dia.  
(O.P.)  
8.4 0.3  
(O.P.)  
11.8 0.4  
7.62 0.1 7.62 0.1  
2.4  
3.2  
7.4  
3.4 0.15  
1.3  
6-C0.3  
(4.0)  
0.5  
7.62 0.1 7.62 0.1  
19.8 0.3  
1-(6) Right angle terminal  
PC board pattern  
(P.T.)  
0.6max.  
4.0  
3-1.5 0.05 dia.  
(O.P.)  
8.4 0.3  
7.62 0.1 7.62 0.1  
2.4  
5.08 0.2  
3.4 0.15  
R0.5  
6.4  
0.5  
(2.8)  
(4.0)  
7.62 0.1 7.62 0.1  
19.8 0.3  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
1-(7) Left angle terminal  
mm General tolerance: 0.25  
PC board pattern  
(P.T.)  
0.6max.  
4.0  
3-1.5 0.05 dia.  
(O.P.)  
8.4 0.3  
7.62 0.1 7.62 0.1  
2.4  
5.08 0.2  
6.4  
3.4 0.15  
R0.5  
0.5  
(2.8)  
(4.0)  
7.62 0.1 7.62 0.1  
19.8 0.3  
1-(8) .110 Quick-connect terminal  
4.0  
NO  
C
NC  
0.15  
3.4  
0.15  
7.1  
11.0  
0.1  
5.5  
0.1  
2.5  
0.1  
6-C0.6  
2.8  
0.1  
0.1  
0.5  
3-1.2 0.05 dia.  
9.5  
0.15  
7.6  
4.0-00.15  
5.2  
0.15  
0.3  
15.2  
19.8  
0.2  
6.4  
Dimensions other than drawn above is same as self-standing PC board terminal.  
2.FS-T switches (Cross-line terminal type)  
2-(1) PC board terminal  
Pin plunger  
PC board pattern  
0.3  
(
)
P.T.  
7.6  
4.0  
0.6 max.  
3-1.35 to 1.50 dia.  
+0.1  
-0.05  
(
)
O.P.  
2.4  
10.9  
0.3  
7.7  
3.3  
8.4  
6.7  
(Button position)  
8.8 0.1  
2.4  
NO  
16.1 0.1  
C
NC  
3.2  
7.0  
+0.1  
2.4  
dia.  
-0.05  
0.1  
2.5  
Pretravel, Max. mm  
0.6  
0.1  
0.4  
0.5  
0.1  
1.2  
0.1  
9.5  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.2  
6.4  
8.8  
16.1  
19.8  
Distance from mounting  
hole, mm  
8.4 0.3  
Operating  
position  
0.3  
Distance from standoff,  
mm  
11.7 0.4  
Short hinge lever  
0.4  
(
)
P.T.  
5.0  
4.0  
12.85  
2.5 max.  
Pretravel, Max. mm  
2.5  
0.5  
0.8  
(
)
O.P.  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.8  
8.8  
NO  
C
NC  
Distance from mounting  
hole, mm  
8.8 0.8  
Operating  
position  
Distance from standoff,  
mm  
12.1 0.9  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
mm General tolerance: 0.25  
Hinge lever  
0.4  
(
)
P.T.  
4.0  
7.15  
12.85  
2.8 max.  
Pretravel, Max. mm  
2.8  
0.8  
1.2  
(
)
O.P.  
Movement differential, Max. mm  
Overtravel, Min. mm  
0.8  
8.8  
NO  
Distance from mounting  
C
NC  
8.8 0.8  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
12.1 0.9  
Long hinge lever  
Simulated roller lever  
Roller lever  
(
)
P.T.  
3.5 max.  
0.4  
4.0  
13.1  
Pretravel, Max. mm  
3.5  
1.0  
1.6  
(
)
O.P.  
Movement differential, Max. mm  
Overtravel, Min. mm  
1.2  
8.8  
NO  
C
NC  
Distance from mounting  
8.8 1.2  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
12.1 1.3  
(
)
P.T.  
4.0  
0.4  
2.8 max.  
6.3  
12.85  
R2.5  
Pretravel, Max. mm  
2.8  
0.8  
1.2  
(
)
O.P.  
11.65  
0.8  
Movement differential, Max. mm  
Overtravel, Min. mm  
NO  
C
NC  
Distance from mounting  
11.65 0.8  
14.95 0.9  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
(
)
0.4  
P.T.  
3.2  
5.15  
2.5 max.  
5.0 dia.  
Pretravel, Max. mm  
2.5  
0.5  
0.8  
(
)
O.P.  
0.8  
14.5  
Movement differential, Max. mm  
Overtravel, Min. mm  
NO  
Distance from mounting  
C
NC  
14.5 0.8  
17.8 0.9  
hole, mm  
Operating  
position  
Distance from standoff,  
mm  
2-(2) Solder terminal  
(
)
P.T.  
0.3  
7.6  
4.0  
0.6 max.  
(
)
O.P.  
+0.1  
-0.05  
0.3  
7.7  
3.3  
2.4  
8.4  
6.7  
(
)
3.9  
NO  
C
NC  
2.4  
6.4  
+0.1  
2.4  
dia.  
-0.05  
0.1  
2.5  
0.5  
1.5  
0.1  
9.5  
0.2  
2.8  
8.8  
0.2  
16.1  
6.4  
0.3  
19.8  
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 
AV3,AVM3/AVT3,AVL3  
2-(3) .110 Quick-connect terminal  
mm General tolerance: 0.25  
(
)
P.T.  
0.3  
4.0  
7.6  
0.6 max.  
(
)
O.P.  
+0.1  
-0.05  
0.3  
2.4  
7.7  
6.7 8.4  
NO  
C
NC  
2.4  
3.3  
+0.1  
2.4  
dia.  
11.0  
-0.05  
0.1  
5.5  
0.15  
7.1  
0.1  
2.5  
1.2 0.05 dia.  
0.1  
0.5  
2.8  
0.1  
9.5  
8.8  
0.2  
6.4  
16.1  
0.3  
19.8  
As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal.  
NOTES  
1.Regarding fastening of switch body  
In fastening the switch body, use flat  
filister head M2.3 screws, with tightening  
torque of not more than 0.29N·m.To  
prevent loosening of the screws, it is  
recommended that spring washers be  
used with the screws and adhesive be  
applied to lock the screws.  
2.Soldering operation  
6.Cautions regarding use  
For manual soldering: 60W soldering  
iron, soldering completed within 3  
seconds; do not apply force to the  
terminals.  
For automatic soldering tank: 250°C  
immersion, completed within 6 seconds,  
350°C immersion, completed within 3  
seconds.  
Terminal portions must not be moved in  
min.1 minute after soldering.Also no  
tensile strength of lead wires should be  
applied to terminals.  
3.Regarding connector connections  
(.110 quick connect terminals)  
For making connections, a dedicated  
receptacle for .110 quick connect  
terminals should be used, and the  
terminals should be inserted parallel to  
the receptacle.Consideration should be  
given to mounting so that no tensile load  
is applied to the lead wires.  
This subminiature switch has been  
designed as a dedicated switch for AC  
use, but it can be used for low capacity  
DC circuits.  
Please select gold-clad contact types  
when loads are in the low-level area of  
1mA up to 100mA and 5V up to 30V.  
After mounting the switch and making  
wiring connections, the insulation  
distance between ground and each  
terminal should be confirmed as  
sufficient.  
The positioning of the switch should be  
such that the pushbutton or actuator for  
the switch should not directly apply force  
to the operating section in the free  
condition.For a pushbutton, the force  
from the pushbutton should be applied in  
a perpendicular direction.  
In setting the movement after operation,  
the over-travel should be set not less  
than 70% as a standard.Setting the  
movement at less than 70% of O.T.may  
cause troubles such as mis-contact and  
welding due to small contact force of the  
switch.  
3 A  
Ag  
100 mA  
Au (-61)  
Triple layer contact type  
1 mA  
0
DC  
AC  
5
5
15  
30V  
30  
250V  
(Reference only)  
For switching of inductive loads (relays,  
solenoids, buzzers, etc.), in order to  
prevent damage to contacts due to the  
occurrence of arcing, an arc absorbing  
circuit should be applied  
4.In making the switch selection  
Consideration should be given to provide  
for no interference up to +20% variation  
of the standard characteristics values.  
5.Environment  
7.Quality check under Actual Loading  
Condition  
To assure reliability, check the switch  
under actual loading conditions.Avoid any  
situation that may adversely affect  
switching performance.  
8.When using lever type switch, care  
should be taken not to apply undue  
force on the body from the opposite  
side or side ways to its operating  
direction.  
Locations where corrosive gases having  
a bad influence on contacts are present,  
and locations where there is an  
excessive amount of siliceous or other  
abrasive dust should be avoided.  
N.C.  
side  
Stroke  
Contact  
force  
0
70% of O.T.  
N.O.  
side  
specified value  
Usable  
area  
O.T. spedified  
value  
P.T.  
O.T. max.  
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.  
 

Milwaukee Impact Driver 9057 1 User Manual
Napoleon Grills Gas Grill BIPT450 User Manual
NCR Scanner 7837 User Manual
NETGEAR Network Hardware WNA3100 100ENS User Manual
NETGEAR Network Router JNR1010 User Manual
Neuro Logic Systems Computer Monitor RFT 17 User Manual
Nortel Networks IP Phone NN43112 107 User Manual
Panasonic All in One Printer KX PS8000 User Manual
Panasonic Home Theater System HT S790 User Manual
Panasonic Telephone KX G2200A User Manual